If you’re about to play a big gig, change the strings that morning to prevent unexpected breaking.
Though it is rare, some guitars have special holes or winding patterns near the strings. Don’t cut the strings off without taking a quick look at everything.
If you’re a beginner, just loosen one string at a time. Then replace it and repeat with the next string. Once loose, you can unwind the string off the tuning peg and free it from the neck of the guitar. [2] X Research source
Most guitars are strung in a simple, straightforward manner, so just follow the string through the guitar to remove it. Do not yank the strings out. Protect your guitar by taking your time. If you have a wrap-around bridge, you will be able to pull them out of the underside of the bridge. Wrap-arounds started out as Toms when players like ZZ Top wrapped the strings around the tailpiece to give the string height a low profile without any buzz. [4] X Research source www. dummies. com/how-to/content/removing-old-guitar-strings. html
The tuning pegs aren’t marked, but you should just replace the strings in the same order you took them out. On most electric guitars, the first peg is for the top string, then each one further towards the tip of the head is for a string further down. [7] X Research source
Your right hand will be coming towards your body, away from the guitar. Your left hand will be pushing up, in towards the other tuning pegs.
You’ll have a small coiled bit of string right where the string meets the tuning peg.
Use a tuner to slowly get yourself up to the proper tension. When in doubt, try not to over-tighten – this causes strings to break.
If your head has a 3x3 set-up, remember that the lower set of tuning pegs must be turned in reverse. Simply repeat the proceeding instructions, replacing left with right and up with down.
